Kenobi TryHackMe Walkthrough

9 months ago 155

Today it is time to solve another challenge called “Kenobi”. It is available at TryHackMe for penetration testing practice. The challenge is an easy difficulty if you have the right basic knowledge and are attentive to little details that are required in the enumeration process. The breakdown of the Machine with redacted flags is as follow:

Level: Easy

Penetration Testing Methodology

Network Scanning Nmap Scan Enumeration Connecting SMB Service Acquiring Log File Exploitation Searching for exploit using Searchsploit Grabbing the Exploit Page Connecting to FTP Service using netcat Copying id_rsa file Mounting the remote directory Grabbing id_rsa file Connecting SSH service Reading User Flag Privilege Escalation Enumerating SUID Permissions Enumerating Binary using strings Creating malicious Curl Adding malicious Curl in PATH Running the Binary Getting Root Shell Reading Root Flag


There are two flags in this machine to discover. After Booting up the target machine from the TryHackMe: Kenobi Page, an IP will be assigned to the machine and will be visible on that page as well.

IP Address:

Network Scanning

We will start a Nmap scan with the -sV from performing a Version Scan and -sC for default scripts on the target machine.

nmap -sV -sC

We have five services running on the target machine. We have 21 (FTP), 22 (SSH), 80 (HTTP), 111 & 2049 (RPC), 139 & 445 (SMB).


To enumerate the SMB service, we will use the smbclient with the IP address of the target machine as shown in the image. We can see that there is a share by the name of anonymous. Upon accessing the share, we find a text file by the name of log.txt. We transfer the log file to our Kali machine to take a better look at it.

smbclient -L \\ smbclient // ls get log.txt

Reading the log, we can see that it contains the path for the id_rsa key stored on the target machine. Also, it points to the fact that the FTP service running on the target machine is ProFTPD.

cat log.txt


As we need to get our hands on the id_rsa file and we see that we have the ProFTPD on the target, we need to figure out a way to get access to that file through the FTP service. To check if we have any known vulnerabilities regarding the ProFTPD using Searchsploit. We see that we have the vulnerability named File Copy. We used the searchsploit to download the exploit file using the -m option. Here, we see that we need to run two significant commands: CPFR which means Copy From, and CPTO means Copy To.  So we can use these commands to copy the id_rsa file from its location to a place from where we can acquire it.

searchsploit ProFTPD 1.3.5 searchsploit -m 36742 cat 36742.txt

We used netcat to connect to the FTP service on the target machine. We used the CPFR command to copy the id_rsa from the home directory of the Kenobi user. Then we used the CPTO command to provide the destination address for the id_rsa file. We transferred the file to /var directory.

nc 21 SITE CPFR /home/kenobi/.ssh/id_rsa SITE CPTO /var/tmp/id_rsa

Now that we have successfully transferred the id_rsa into the var directory, we can mount the /var directory so that we can access the id_rsa files on our local machine. We created a directory by the name of /ignite inside the /mnt directory. Next, we used the mount command to mount the remote var directory to our local ignite folder. Moving to the ignite directory we found the id_rsa file. Changing the permissions of the id_rsa file to make it ready to connect via SSH.

mkdir /mnt/ignite mount /mnt/ignite cd /mnt/ignite/tmp ls cp id_rsa /root/ cd /root chmod 600 id_rsa

With the help of the id_rsa key, we were able to connect to the target machine as the Kenobi user. Here we were able to read the first flag by the name of user.txt.

Privilege Escalation

Now that we have the session on the target machine and we have the user flag. Let’s move on to enumerating the permissions to figure out a way to elevate privileges. We used the find command to check for all the binaries with permissions and found /usr/bin/menu to not be usually found in Linux. It could be our way to root.

ssh -i id_rsa [email protected] cat user.txt find / -perm -u=s -type f 2>/dev/null

We ran the menu binary to see that it prints a menu with options such as status check, kernel version, and running ifconfig. We ran the kernel version and got version 4.80. This binary must be running the command in the background to get these outputs. To understand better, we used the strings command to fetch all the human-readable snippets from the binary and found that it uses the curl command to get the localhost. As it doesn’t mention the full path of curl, we can create a malicious payload with the name curl and add it into the path. This will make the binary run our malicious file instead of the original curl.

/usr/bin/menu strings /usr/bin/menu

We moved to the tmp directory and created a binary invoking the /bin/sh and named it to curl. Then we changed the permission of the binary to be executable. At last, we added this curl into the local path using the export command. Now running the menu binary, we choose an option from the menu and we got ourselves the root shell. We read the root flag and conclude this machine.

cd /tmp echo /bin/sh > curl chmod 777 curl export PATH=/tmp:$PATH /usr/bin/menu Id cat /root/root.txt

Author: Pavandeep Singh is a Technical Writer, Researcher, and Penetration Tester. Can be Contacted on Twitter and LinkedIn

Read Entire Article